The keyboard adapters are sweet looking boards if you ask me. It took me about an hour to build up one keyboard adapters, that is after the three hours it took to remember how to program the AVR correctly.. So far it looks fine, but I have a little more testing to do. Here is the front and back of the PCB and the board I just built.

The second Mimeo 1 boards are also in. One little hitch though. This time, the fab house decided to mask the silk screen with the solder mask, against my explicit instructions. The only place where you can tell the difference is in the power supply section as shown here. I didn’t notice it at all until the third time I was reviewing the board. The rest of the board looks exactly like the first batch, as it should, since the same CAD files were used.

I’m going to complain to the fab guys tomorrow and see what they will do about it.