I need to take another shot (fifth) at the SCELBI front panel screen. I should have time this weekend for this attempt. The last failure was due to the transparency and screen not being perfectly flat, so the exposure was not sharp.

Decaling the Tape Enclosure failed in two ways. First failure was due to the toner in my laser not transferring well to the decal film. I made an attempt at using the result anyway, just to see how a good decal would look in this application. It went on OK, but the decal melted when I tried to clear coat with a heavy coat of clear satin lacquer. I think a lighter coat of testers gloss coat would work OK. In any case, I’m exploring getting dry transfers made, which would be more authentic anyway. I made up artwork for a double set of transfers for the Cassette Tape, TTY, and the back of the main enclosure and sent it off for a quote.

Decals/Transfers 4×6