Mike's Minolta SRT Parts Page
Sources for commonly needed parts varies a great deal, from home made
replacements to you local department store, to specialized mail order houses
and most importantly, old, broken, parts cameras.
Overall
That Peskey Little Red Dot
- A new one can be fabricated by cutting a thin slice from the shaft
of a cheap 2mm or 5/64 inch drill bit. I used a dremel cut off disk,
but a better cut can probably be made by taking your time and using a
fine hobbiest or jewelers saw. A little bit of red paint completes
the job. The red dot on the camera shown on my main SRT page was
made this way.